Straps & Small Leather / Nylon Pass-Through Watch Strap

Nylon Pass-Through Watch Strap

4.6 / 5 • Mis à jour September 2026
Straps & Small Leather

Image illustrative (photo de stock) ; ce n'est pas le produit exact.

It Cannot Drop The Watch

A conventional two-piece strap attaches with a spring bar on each side, and if either fails the watch falls.

A pass-through strap threads under the case through both bars, so a single bar failure leaves the watch still attached by the other.

That was the original military reasoning and it remains the strongest practical argument for the design, quite separately from how it looks.

Washable And Quick Drying

Nylon can be washed when it gets dirty and dries quickly, where leather cannot be washed at all and develops odour when worn in heat.

For a watch worn during exercise, in summer or anywhere near water, that is a decisive practical advantage.

It also means a strap stays hygienic over years rather than gradually absorbing sweat like a leather one does.

Sizing By Lug Width

Straps are sized by lug width, which is the distance between the lugs measured in millimetres, and it is frequently printed on the watch or measurable with a ruler.

A strap one millimetre too wide will not fit at all, and one a millimetre narrow leaves visible gaps either side and slides slightly.

Getting that measurement right is the single thing that determines whether a strap works, and it is the commonest ordering error.

Length is the second measurement to consider, since standard straps suit average wrists and a very small or very large wrist needs a short or extra-long version. A strap too long leaves an unwieldy tail flapping, and one too short cannot be fastened at all, and both are avoidable by checking the stated length against a strap that already fits you.

Height And Cuffs

The strap passes under the watch, which lifts the case slightly off the wrist and adds a few millimetres of height.

On a thick watch that can make it awkward under a shirt cuff, which is worth considering for anybody wearing one to an office.

Single-pass versions exist that thread through without the extra layer under the case, which reduces the height while losing some of the security benefit.

Hardware And Tail

Buckles and keepers are where cheap straps fail, and brushed hardware suits most tool watches better than polished.

The excess tail is characteristic of the design and can be tucked through the keepers, trimmed and heat-sealed, or left, which is a matter of preference.

Well-made straps have properly finished ends and stitched keepers, where cheap ones fray and the keepers work loose within months.

Thickness is worth matching to the watch, because a thick strap lifts a small watch awkwardly high off the wrist where a thin one under a heavy diver feels insubstantial and lets the watch rock. Seatbelt-weave versions are noticeably thinner and smoother than standard nylon and sit better under a cuff, while giving up a little of the rugged character that suits a tool watch.

The Verdict

The most practical strap type for an everyday or sports watch, being more secure than conventional designs, washable and very cheap.

It adds height under a cuff, is wrong for a dress watch, and lug width must be exactly right.

Measure your lug width before ordering. It is the commonest mistake and a millimetre either way makes the strap unusable.

En un coup d'œil

Avantages

  • Survives a single spring bar failure
  • Washable and quick drying, unlike leather
  • Transforms a watch for very little money
  • No odour problems in heat

Inconvénients

  • Adds height, awkward under tight cuffs
  • Inappropriate on a dress watch
  • Lug width must be exact
  • Cheap versions fray and keepers loosen

Questions fréquemment posées

Why is it more secure?

It threads under the case through both spring bars, so if one fails the watch is still held by the other. A conventional two-piece strap drops the watch when a single bar fails, which is the commonest way watches get lost.

What size do I need?

The lug width in millimetres, which is often printed on the watch or measurable with a ruler between the lugs. One millimetre too wide will not fit; one too narrow leaves gaps and slides. It is the commonest ordering error.

Will it work under a shirt cuff?

It adds a few millimetres of height because the strap passes under the case, which on a thick watch can be awkward. Single-pass versions reduce that at the cost of some of the security benefit.

Spécifications

TypeSingle-piece nylon pass-through strap
SecuritySurvives one spring bar failure
MaterialNylon; washable and quick drying
SizingBy lug width in millimetres
HeightAdds a few millimetres under the case
Single pass versionLower profile, less secure
HardwareBrushed suits tool watches
TailTuck, trim and seal, or leave

Résumé

More secure than conventional straps, washable, and very cheap. Measure your lug width — a millimetre either way ruins it.

Vérifier le prix sur Amazon